mounting trolling motor

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

newboater13

Member
Joined
Dec 22, 2012
Messages
18
Reaction score
0
Location
West TN
I have an alumacraft 1436 trying to figure how I can mount a transom trolling motor to the bow ive looked around the site and on the internet so many different ways it seems.ive included a pic my problem iis my rails are rounded and most ideas ive seen the are flat on the bow and help would be nice.
 

Attachments

  • 20130225_123206.jpg
    20130225_123206.jpg
    1.5 MB · Views: 403
  • 20130225_123215.jpg
    20130225_123215.jpg
    1.6 MB · Views: 403
Keep looking through the builds because there are lots of people that have already done exactly what you're trying to do. It's not that complicated unless you're overly concerned about size or looks.
 
Also look for somebody that has reversed the prop on the shaft if you haven't done that already.

https://www.tinboats.net/forum/viewtopic.php?f=3&t=29035
 

Latest posts

Top