basslipripper
Active member
- Joined
- Apr 22, 2014
- Messages
- 28
- Reaction score
- 0
I purchased the Aluminum "Troll Mate" Trolling motor tray for my Bass Tracker Pro Team 190tx. It was around $75 bucks.
It arrived a few days later.
Unboxing: the tray had a nice finish and came with template, screws and a drain tube.
Install: took about 20 minutes. Set the template where I thought it would go, traced it out on the carpet with a sharpie, drilled holes at each corner and used a jig saw to cut it out. Before installing the pan I sprayed
some Super 90 3m adhesive under the carpet. I also sprayed some on the top edge of the Fresh cut to help keep the carpet from unravelling and to help it bond to the lip of the tray. Finally I dropped the Tray in and screwed it down, I then screwed the pedal to the tray.
So far I really like this upgrade. the tray is sturdy and works well. I would recommend it to anyone who is looking to do this mod.
https://m.ebay.com/itm/121052289491?nav=SEARCH
It arrived a few days later.
Unboxing: the tray had a nice finish and came with template, screws and a drain tube.
Install: took about 20 minutes. Set the template where I thought it would go, traced it out on the carpet with a sharpie, drilled holes at each corner and used a jig saw to cut it out. Before installing the pan I sprayed
some Super 90 3m adhesive under the carpet. I also sprayed some on the top edge of the Fresh cut to help keep the carpet from unravelling and to help it bond to the lip of the tray. Finally I dropped the Tray in and screwed it down, I then screwed the pedal to the tray.
So far I really like this upgrade. the tray is sturdy and works well. I would recommend it to anyone who is looking to do this mod.
https://m.ebay.com/itm/121052289491?nav=SEARCH