Today we built a trailer. Done 3-15-2009

Trailer related issues and discussion goes here.
User avatar
Codeman
Posts: 896
Joined: 16 Nov 2007, 15:00
12
Location: Ozark Foothills of Se Mo

Today we built a trailer. Done 3-15-2008

Post by Codeman »

I'm gonna try this for right now. I can change it later if I decide that a 2x would work out better. I have also added a 2x support under the front of the boat that isn't on it in the pics.
Image
If it wasn't for the last minute I'd never get anything done.

User avatar
Codeman
Posts: 896
Joined: 16 Nov 2007, 15:00
12
Location: Ozark Foothills of Se Mo

Today we built a trailer. Done 3-15-2009

Post by Codeman »

Just thought I'd update this thread. I have pulled this little jewel a ton this summer and it pulls great. Knowing what I know now there is no way I would shorten the tongue any more than I did. Boat loads very easy and rides like a dream. Also wanted to add the spindle seals that I got from Bearing Buddy worked great. The spindle seal surfaces were chewed up pretty bad and these things saved them. They have been in and out of the water more times than I can count now and they are just as smooth and clean as they were when I put it together.
Image
If it wasn't for the last minute I'd never get anything done.

Post Reply