Tracker Sportsman 1648 Mod (new pics 7/6)

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Great job, been watching it in the background. I like how the factory sticker looks.


Its a nice one, and just like a new pair of shoes make ya run faster, I believe a customized tin boat makes ya fish better =D> :LOL2:
 
On paper it looks like I'll need 8x20 or 6x25. I got samples of the 16 and 20oz and really didn't see much difference until I bent the sample around an edge, then the 20oz was noticable. I'll probably go 20 just because.

Your boat looks nice, now to get out and fish.

Jamie
 
Thanks alot guys! :beer: Couldn't have done it without this site. Maiden voyage should be tomorrow or sunday so some on the water pics and maybe video will be in order.

Ranchero: if you can cover your width with the 6ft I think your better off leaving yourself extra feet at the end. That way you can make sure that the grain goes the same way and you don't get two shades next to each other. Double check that before you start glueing. Good luck!
 

Latest posts

Top