Post a Pic of your boat!
-
- Posts: 7
- Joined: 09 Aug 2020, 21:37
- 1
Post a Pic of your boat!
Hi All...Im new to the site so my first post is a pic of my "new" boat. It's a 1971 Starcraft Seafarer 16 powered by a 2001 Mercury 25. Hopefully next year I can repaint and modify it. Thank you for having me
You do not have the required permissions to view the files attached to this post.
-
- Site Admin
- Posts: 18172
- Joined: 29 Nov 2006, 21:00
- 15
- Location: Shrewsbury, MA
Post a Pic of your boat!
Nice boat! Perfect for a project! 

Be Respectful!
This site is rated PG, No Politics, No Porn, No Bashing allowed!
Please use our Amazon Affiliate link. It costs you nothing and sends a few cents to the site.

Amazon Link!
This site is rated PG, No Politics, No Porn, No Bashing allowed!
Please use our Amazon Affiliate link. It costs you nothing and sends a few cents to the site.

Amazon Link!
-
- Donor
- Posts: 8
- Joined: 11 Aug 2020, 07:35
- 1
- Location: Nebraska & Missouri
Post a Pic of your boat!
2009 Alumacraft MV 1860 SPL CC All Welded
2008 Yamaha F90 4 Stroke
Stainless 13 x 19P. 6000 WOT 41 MPH GPS
2008 Yamaha F90 4 Stroke
Stainless 13 x 19P. 6000 WOT 41 MPH GPS
You do not have the required permissions to view the files attached to this post.
-
- Posts: 6
- Joined: 16 Jun 2020, 13:08
- 1
Post a Pic of your boat!
Here we go.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: 17 Aug 2020, 22:25
- 1
Post a Pic of your boat!
2013 Key West 176cc. Working on get a tin boat at the moment
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: 22 Jul 2020, 16:17
- 1
Post a Pic of your boat!
At the Factory.
On the Lake
On the Lake
You do not have the required permissions to view the files attached to this post.
-
- Posts: 174
- Joined: 17 May 2012, 14:53
- 10
- Location: Seneca, WI
Post a Pic of your boat!
Back in July my wife and I bought a new TIN BOAT!!!! 3/16" thick hull, it was built in 1995 by a custom boat builder in Louisiana. We actually went to his shop and talked to him, and he remembered building it because of the expensive paint job. All welds were ground and it was covered in Bondo and painted with an expensive epoxy paint.
Anyway, it's 21' and it's currently being referred to as "The Tub". It's going in for a new Yamaha 250, electronics, and a trolling motor in a couple weeks.
We found it in western LA and we hauled it to our place in Venice, LA
Here it is shortly after picking it up.

And off the trailer so the trailer could be worked on, and the boat washed up, inside and out.



Can't wait to get out on the gulf with it. This was a couple weeks ago on our neighbor's boat.

And my wife and I are looking forward to use it to catch more of these!!!

Anyway, it's 21' and it's currently being referred to as "The Tub". It's going in for a new Yamaha 250, electronics, and a trolling motor in a couple weeks.
We found it in western LA and we hauled it to our place in Venice, LA
Here it is shortly after picking it up.

And off the trailer so the trailer could be worked on, and the boat washed up, inside and out.



Can't wait to get out on the gulf with it. This was a couple weeks ago on our neighbor's boat.

And my wife and I are looking forward to use it to catch more of these!!!

It says "signature" but when I sign the screen it doesn't show up online.. 

-
- Posts: 4
- Joined: 20 Oct 2019, 10:57
- 2
Post a Pic of your boat!
2019 GTX 19 Klamath, 70hp Yamaha. Bought a bare hull and rigged it myself
You do not have the required permissions to view the files attached to this post.
-
- Posts: 4
- Joined: 20 Oct 2019, 10:57
- 2
Post a Pic of your boat!
Hey any other Klamaths on the forum?
-
- Posts: 3907
- Joined: 14 Aug 2016, 22:25
- 5
- Location: Clayton California
Post a Pic of your boat!
Previous boat was a 15' Klamath Advantage Side Console. Had a four stroke 25 Merc. I added a Humminbird Helix 7 & manual down riggers. I liked that boat a lot. We sure got a lot of use out of it and managed to catch a few trout.
I wanted a larger boat, so I traded up to a Gregor Sportsman 18' walk-thru. I like this boat a lot too! Lol. The layout is basically the same as your boat, but it has smaller capacities than the Klamath GTX.
Anyway, you did a nice job rigging your Klamath. That is a lot of boat and it is nice to see you get a little fish slime on it!
Have Rod - Will Fish
-
- Posts: 4
- Joined: 20 Oct 2019, 10:57
- 2
Post a Pic of your boat!
Thanks, It feels small at times in the salt of the Straight of Juan de Fuca. It was enjoyable doing the rigging and I know how and where everything is 
The slime was from the Kokanee on a local lake

The slime was from the Kokanee on a local lake
-
- Posts: 1
- Joined: 22 Sep 2020, 13:06
- 1
- Location: Swarthmore, PA
Post a Pic of your boat!
First Post. First Boat.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 28
- Joined: 26 Apr 2017, 11:46
- 5
Post a Pic of your boat!
16' Ouachita. Replaced transom and added jack plate and a compression plate on the motor. Been a great duck hunting boat!
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: 17 Sep 2020, 20:06
- 1
- Location: canada
Post a Pic of your boat!
16.5 Tracker
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: 17 Sep 2020, 20:06
- 1
- Location: canada
Post a Pic of your boat!
16.5 Tracker
You do not have the required permissions to view the files attached to this post.