Twister The Short Longtail

This forum is for the Sponsors to talk about their products and make announcements. If you have any questions for the sponsors, ask away here.
mud-skipper
Site Sponsor
Posts: 55
Joined: 13 Apr 2013, 07:57
8

Twister The Short Longtail

Post by mud-skipper »

Just look at our latest longtail. It's short! Using a tough flexible Bowden Cable and putting an s curve in the shaft casing, we've cut the length in half. It's also got a 3 blade STAINLESS prop, and a twist grip throttle!
[youtube]XBGLyo9YUoY[/youtube]

See the kit here https://mud-skipper.com/index.php/twist ... r-kit.html

Enjoy!

Mike
Image

User avatar
Jim
Site Admin
Posts: 17918
Joined: 29 Nov 2006, 21:00
15
Location: Shrewsbury, MA

Twister The Short Longtail

Post by Jim »

Great video! Thanks for posting it! :beer:
Be Respectful!
This site is rated PG, No Politics, No Porn, No Bashing allowed!

Please use our Amazon Affiliate link. It costs you nothing and sends a few cents to the site.
Image
Amazon Link!

mud-skipper
Site Sponsor
Posts: 55
Joined: 13 Apr 2013, 07:57
8

Twister The Short Longtail

Post by mud-skipper »

Our latest product is an 8 to 16Hp Twister kit.

We anticipate delivery of our first consignment in approximately 8-12 weeks. Cost set @ $595.00

The Twister XL has the added feature of a left or right hand Z bend handle. The shaft is about 10" longer than the existing Twister Medium, because the Bowden cable is stronger.

Get the Mud-skipper 16hp electric start engine too.
https://mud-skipper.com/index.php/motor ... ngine.html

PM me if you'd like to reserve a kit.

Pictures soon!

Thanks
Image

Crazyboat
Posts: 484
Joined: 17 Aug 2016, 20:52
5
Location: NJ

Twister The Short Longtail

Post by Crazyboat »

mud-skipper wrote:Our latest product is an 8 to 16Hp Twister kit.

We anticipate delivery of our first consignment in approximately 8-12 weeks. Cost set @ $595.00

The Twister XL has the added feature of a left or right hand Z bend handle. The shaft is about 10" longer than the existing Twister Medium, because the Bowden cable is stronger.

Get the Mud-skipper 16hp electric start engine too.
https://mud-skipper.com/index.php/motor ... ngine.html

PM me if you'd like to reserve a kit.

Pictures soon!

Thanks
16 HP @ 4K RPM, how's it on fuel, seems a very low RPM in todays market, no? (Not that that's a bad thing, 16 HP or max HP at a lower RPM is a good thing.

rotus623
Posts: 257
Joined: 28 Sep 2014, 09:02
7
Location: Charlottesville, VA

Twister The Short Longtail

Post by rotus623 »

Crazyboat wrote: 16 HP @ 4K RPM, how's it on fuel, seems a very low RPM in todays market, no?
The4 stroke motors that are used for these kits typically have an RPM range from 3000-4000 rpms. (Normally 3600 is where most of them are governed, unless a performance kit is installed) so this is normal.

These mud motors are the best bang for your buck IMO. Great products and service.

I am EXCITED to hear about the twister being made for the larger engines. I think I have a 16hp Honda in my near future!!