freeisforme

That roller on the winch arm should contact the boat infront of the eyehook. The winch rope goes under the roller. That helps stop the...

I decided to tear the freebie '59 Evinrude down today. The power head was stuck, but the rest of the thing looks pretty clean for being...

I don't see any markings on the points, at least none that area obvious. They look new. The new points I've got in the OMC box don't...

The lower is off the motor, I filled the wash tub up and just submerged the lower unit after I drained the oil out. I made a 3/8" to...

I think I'd rather have the 15hp OMC than a four stroke performance wise, and the 30 Suzuki will weigh the boat down more than it...

Added a couple pics of the anchor winch installed and finished with wiring completed, etc. BTW, I like the Nautolex vinyl so far...

I pulled the Evinrude apart first, the coils both look new, but the top cylinder's plug wire was pulled back from the coil. It appears...

Over the last few months I picked up two motors, one a 1958 Johnson FD12, the other a 1960 Evinrude Fastwin 18hp The FD12 has great...

Old glass boats with rotten wood buried in several layers of plywood with water logged foam are all too common. About half of the guys I...

Yes, have pulled more than a few off the over-turned hulls of small boats. IIRC my brother and I are up to 11 on-the-water rescues ...

A man walks into a bar with a paper bag. He sits down and places the bag on the counter. The bartender walks up and asks what's in the...

That is the 'bigger' boat, he had a 12ft Sears car topper jon boat before the one they sunk the other day. I think the smaller boat...

Two days ago I got call from a buddy, who is in his 70's saying his boat sunk, and he wanted to know what the chances are of retrieving...