oilsmoke

Intake and carb and if the motor has a cold start primer the hose may also be larger diameter The 35hp carb and intake are roughly 1/2"...

I've seen those boats around here, he must have sold others as well. The one kid had a 40hp on one. Another guy stuck a Kawasaki jetski...

The problem with rusty tube type trailers is that they never protect the inside of the tubes very well and once they start to rust you...

You can find some good information on those motors at Leeroy's Ramblings site https://www.leeroysramblings.com/johnson_E-FD_15_18hp.html...

Years back I had a 12 gallon tank with no gage, what a pain to check for fullness ! I made a dipstick from a piece of wooden dowel rod...

I have the same tank for my 25HP Merc. Gauge has yellowed and unreadable. Unlikely to find that large of fill cap with integrated...

I don't know many people here who run newer motors, most tried four strokes, and went back to the older OMC motors. Of course, they've...

Its amazing how many bad decisions some guys make when going out on the water. Those two are lucky they weren't fish bait themselves...

I'd leave it where it is, why bother getting involved in a project with no definite outcome. No matter why the low compression, its not...

Nothing. I stopped doing gift exchanges long ago and just spend time with the family. For a lot of people, it's just a way for them to...

Race car parts

Usually if its really cold out and I need to start one I'll fill my run tub with warm water. A buddy who works on a lot of outboards in...

I only paint or repaint those that were painted when new, if it came as bare aluminum, I just buff and wax it and maybe coat the inside...