Rob4

One step closer to floatin!

Sorry, not your guy for a specific answer, but I just researched the Lithium Bats to save weight on my boat. I really think there's no...

Good tips! I'm trying to keep weight down at this point, as I used 23/32 for the decks, so will leave the floor as is. Boat has a 725#...

Shoulda used 5/8 had 23/32 CDX. Painted it twice, then waterproof carpet cement on top and used 3M 90 spray adhesive and stainless...

Added a couple pics of the anchor winch installed and finished with wiring completed, etc. BTW, I like the Nautolex vinyl so far...

That first Pic on this thread, with the triangle of vinyl is what I did with Nautilex, but the triangle is upside down in that Pic. You...

Some pics of my winter project. Made it into a brown trout! Third time down this road with various boats. First time with a tin boat...

So, ended up buying an electric anchor for the bow. My wife is usually up there, and it'll make it a lot easier for her. There is a...

Sounds exactly right.

This is perhaps to late in the process to help but I will shair my journey of seat replacement in a 67 14' Meyers Laker Super Pro...

I did some research on vinyl but decided on EVA foam instead. One thing I did gather from that research is to make sure you use marine...

I've redone 3 boats, but with carpet; never with vinyl. I bought Nautolex vinyl this time. Anything specific you used to glue it down...

Bump again?

Bump.

The prop is stock. At gross weight (two fisherman & tackle), the boat will do 21-22 mph; I've done nearly 25 if the wind is with us. I...