admirial_deluxe's latest activity

Building a motor stand is easy. Put wheels on it.

I will be selling a '56 30hp Johnson Seahorse Javelin in the near future. I'd like advice on how to prep it for storage (when I take it...

Any update on the project? I'm putting a Navy 6 on my 300lb '56 Lone Star Admiral. Seems similar to your Constellation. Love the...

FWIW, the newer ePropulsion Navy Evo 3/6 line play well with third party batteries.

Sure was! Here's a hint: when switching from rich to lean, it helps to have it in neutral. Or at least low throttle LOL (It also helps...

I was able to get the boat on the water yesterday for the first time since purchasing it a week and a half ago. We got up on plane after...

I would suggest using a maroon Scotch-Brite pad to simply knock off the flakes. What remains will most likely continue to remain. If...

If you do decide to start the engine make sure you have the gearcase submerged far enough to cover the water pump entirely prior to...

All good info. I've got a pressure tank with it. "Rodents nest", eh? The ad will read something like "fits in well with the natural...

Thanks for the great information. I plan to remove the engine and replace it with an ePropulsion Navy 6.0 10-hp electric equivalent. I...

Great to hear that cold won't be an issue. Is it correct to say that it would start easier in warmer temperatures? Or do the two strokes...

Cold won't be an issue unless extreme like zero or below. Once the test run is over, the motor will self drain, a couple pulls on the...

Just got a Lone Star Admiral with a '56 Johnson 30 HP on it. It's freezing up here in Indiana so we did not start it when i took...

I assume you want the final job to look "halfway decent." That's a subjective call, but it's not "boat show perfect." I did that for...

Your point is taken. The "right way" to keep paint from ending up in our pristine lake. The actual question is Can the existing...