Recent content by ChuckB

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    9.9 not exciting enough 😂

    You can look for similiar sized newer boats. The Lund 1400 Fury has a max HP of 30. If that boat has no wooden floor then its probably 25hp like the Lund WC14.
  2. C

    2003 Bass Tracker Livewell Pump

    If the white base is not broken and you can find a pump that the base fit on and reuse the white base. My hose barb on my pump was broke but I just found a replacement pump and used the same through hull base. This base is different so I don't know how the black piece is attached to the white base.
  3. C

    Engine height

    Ok, I think I will leave the motor at the same height and just had some aluminum strips as backing support to the lower bolts. I still have to remove the motor to replace the wood in the transom so right now I think I will get the electric hoist and mount it in my garage. A cherry picker would...
  4. C

    Engine height

    I have considered a chain hoist but then I need to mount it somewhere. I have heard that harbor freight will have the 1 ton cherry picker in the next parking lot sale. It would give me the option of pulling engine in different spots. The biggest pain with a cherry picker is storing it when not...
  5. C

    Engine height

    Thanks, might just use a peice of the plywood that I will need for the transom.
  6. C

    Engine height

    True, but the wood part of the transom is around 10 maybe 10 1/2 inches from the top. The top of the sloted hole is 10 inches down So a lower mount transom support plate would probably fit. I have s support plate on the top bolts. I guess pushing forces are not a problem because the whole...
  7. C

    Engine height

    Here is the straight edge. The main reason I want to raise it is to be able to get the bottom bolt in the wood part of the transom. At the very top of the bottom elongated hole it would be very close right now. My plate is 1 3/4 inch below the bottom of the boat so maybe raise it one hole on...
  8. C

    Engine height

  9. C

    Engine height

    I bought my first boat last October. I did not notice at the time but there is flex in the transom so I think I should replace the wood but the engine height also look a lower than ideal. The bottom bolt holes for the engine do not go through the wood part of the transom. I would have to drill...
  10. C

    Boating Etiquette

    It would be nice if kids with a kayak fishing in a boat dock area be aware that they need to move out of the way of boat trying to dock.
  11. C

    Towing with Smaller SUV

    A pilot is more than enough to handle any single axle boat/trailer combo. I see peope trying to tow large boats with midsize SUVs and they concern me more but not a 1500-2000 lb trailer/boat combo.
  12. C

    Tow capacity ?

    You could try it at least one. Getting up the ramp might be the hardest task it needs to perform and it would be a concern with that amount of stress on the SUV. Braking would be a concern on the road because the trailer will have surge brakes which on a boat trailer are not always working very...
Top