DaleH's latest activity

Don't put them in something small and tippy. A wide 16' boat will serve them well even if only with an 55-80# trolling motor and (2)...

I like thill’s idea for a gangway that can be pulled up …

HULL - Welp, Hell of a difference in price and other size-related factors between that of a 12’ for 2-3 or a 16’ w/ OB for 5 to 6 on...

FYI, I found some top-rated “Anchor Alarm” apps for iPhones, where one of the best is FREE! Set it for say a 100’ radius zone (I’ll...

A W E S O M E , thanks!

@thill - How many "trigger pulls" from FULL bight ON to OFF? It looks like at least 4 cycles? The ad says: Brightest spotlight...

Not 'tin' but my skiff is! Man oh' man ... I sure got LUCKY on this one! Now THIS will wake you up ... ! Now I have never set an...

I made a CORRECTION to the photo, as the solar array in on the REAR of the light, so if you leave it on your helm with the lens down ...

See if they have a 4-blade for that 115, you won’t have a blazing fast WOT, but otherwise the hole shot & all-around performance can be...

FWIW, here are the stock OEM props to fit:

Turning Point makes these. Read up HERE for how their ‘pressed aluminums’ props run as fast as SS props...

A self-etching primer becomes one with the tin, zinc-chromate was sooooooooooooooo good the EPS banned it! Use the Rust-Oleum...

Better yet ... fhugghedabout the carpet altogether and add vinyl gutter material on top ...

One had better PRIME it 1st ... or this is the result on UNprotected tin!

My favs are the pressed aluminum ones by Turning Point that are almost as thin in blade section as SS ones. But never overlook OEM ones...