FuzzyGrub's latest activity

The OEM used 1/2" plywood and the styrofoam sheets did not support it. There should be a ledge for the mounting on the side and screws...

Solas Prop Finder Link Search results for your prop:

The only issue I could imagine is using some excess battery power by trying to keep the boat going in the direction you want. When...

For (hopefully) obvious reasons mounting a trolling motor as close to the centerline as possible would be the best practice. In actual...

I saw in the manual that they recommend rebalancing every 6 months. Given your use, doesn’t sound like that would be needed. I have no...

I’ve had both of those brands in I/O props. They work. I think Solas has a wider selection.

If there are no pacemaker warning decals, probably low exposure.

I’ll second getting the largest that the boat is rated for. The common jet sizes are 150/105, 115/80, and 90/65. The latter would be...

Seems a little light on the motor. What’s the boat rated for?

That with your engine model/year to ID the hub/splines and gear case diameter should get you there. I have had good luck with Solas...

This latest return, was the first that the broken rod did not have to back to St Croix Just had to take picture and submit. Mine is...

They do not recommend that. If going with two in series or parallel, they recommend using the same battery model purchased at same...

I run a 45lb MG Wireless on the bow of the DMI1648. Plenty of power, but might upgrade to a GPS model, and would get a minor bump in...

Looks like you can get a free 10A charger with it too.

I saw a recent news blurb that CA has excess solar on many days, and requiring batteries for new installations to get the incentives.