navipro

Another step towards the goal. This week I have worked on colour change. As you remember the boat had beige/blue palette and it is super...

The subsequent coats of varnish darken wood much more.

I was hoping that 1/4 inch aluminum should be enough to hold it. Do you think i still need a ply backer? Just a small update this...

So here is a little update. i have worked on the downrigger mounting platform and here is what i came up with. i have taken the original...

Interesting..... i will see what i have laying around. Thank you for the suggestion

Thank you. I was trying to keep the gunnels clean, as the cover will be on the boat most of the time and these mounts have a tendency of...

Thank you. I have inspected the hoses and they looked fine, no cracks, still flexible. So the executive decision was made to keep them...

Thank you for your input. I have another option that I want to try. Basically move the aluminum angled panel out. I will mock it up next...

Hi guys, to be honest I was not expecting plywood to be such a large project. Like Thrill said, I have ended up measuring almost all...

I have started working on the floors. It is much more painful then I anticipated. I do have the old flooring, but it is covered with the...

Thanks! It is an Ac/dc tig setup. I do not think I can find a cheaper option. And to be honest, even with my lousy skills, it does the...

So the good milestone is here! Transom is in! After 2 coats of otf and 5 coats of varnish, it is finally in its place! I have added...

Around me Menards has the quart cans of tint able base.

I've not done it but would go to my local store that sells it and ask if they will tint it. Like ACE or one of the big box.

Which stores tint it?