Ray Clark's latest activity

Haven’t had any updates in a while, but over the winter, I noticed the snow and water would pool on my cover. So, with some PVC, I fixed...

Finally done. I’m happy with how it came out, but happier know that my family and I created some memories while restoring Pappaw’s old boat.

Last was some seats for easier cruising. Now I just need a good motor to put on her and we’re off… Again thank you all for the...

Then it was time to wire up the lights. Navigation, headlights, radio and floor lights using a switch panel to power it all up.

Then paint to the seats and carpeting to the floors. Rustoleum farm Ford Blue for the win again

Then seats and floors. Everything wood was sealed with a fiberglass resin. Also, I added expanding foam under the floors and made a mold...

Then onto the interior. Coat it (same wire wheel, sandpaper and acetone bath as before). Went with the Rustoleum primer grey as well

Then time to paint. Rustoleum farm and implement in gloss black (looked good everywhere else so why not) and Ford blue. Lost of taping...

Next was to seal the boat. Coat it on the bottom followed by paint. Again wire wheel, sand paper followed by acetone prior to applying...

Then it was onto the transom. Took a bit to get this out, but patience and will power. I coated the new transom with a fiberglass resin...

Hey everyone, I bought this bought back in 1999 from my grandpa. Thanks to all of the knowledge I gleaned from here, I’ve got the gal...

:LOL: Thank you. I've decided to repair the motor to get it running right, then sell it. Thank you all for the advice. Thank you for...

@Cullix: Welcome to the forum! My perspective on 2S versus 4S: I have a 20HP 4S Merc on my 14' tinnie. I bought the outboard new in...

Grilled BBQ chicken with rice and beans and steamed vegetables. Small restaurant in Belize.

Tomato vegetable soup with chicken.