Stand Up's latest activity

Here are some pics. As you can see, the LED side-light is big... but does it produce? Oh yeah.... Was hard to actually get a pic of...

It has two buttons, a regular trigger and one on the side for the area lighting Front trigger = spotlight - High, Medium, Low, Off Side...

I worked for the local power co-op for a number of years. You’d be surprised at what your “average” person doesn’t know. I got called...

If the fuse over your transformer is still good, it will try to feed the entire primary circuit. Your house just became the substation...

And by charging those wires, you'll be giving free energy to your neighbor, assuming there's not a transformer just for your residence...

Glad everything worked out.

Some real horror stories here for boaters...I can say that over my lifetime I have moved to get away from restrictive rules and...

To remedy the buried lower unit and get the RPM up to an acceptable range, I installed a 17-pitch prop and raised the motor several...

Some shots with the interior done showing the convertible rear bench seat and casting deck layout with the jump seat clipped in to the...

Some docking lights added to the bow. Told you I went overboard on the LEDs. It took about two full days to get the wiring done...

Another shot of the gauge pod. Gauges are Faria Beede Euro black on black - 7k RPM tach, fuel level, and battery level. The three...

Some pics with the Tuffcoat applied to the tops of the gunnels and floor and black carpet glued in on the sides. The bow plate was...

Some day when it gets completed!

In between interior paint and everything else going on, I started mounting hardware and lighting. I admittedly got stupid with LED...