Stand Up's latest activity

I have an 2009 Alumacraft Yukon 165. I wanted to put flex tubing that ran on the bottom of the boat from the bow to stern for running...

You aren't kidding. A couple years ago my family rented out a lake house on one of the resorts at Table Rock for thanksgiving...

The trailer frame was hot dipped and is actually still in good shape. Pretty much everything else is rusted to one degree or another...

That's hardly "new", but being a 1964, it'll be a silver quarter, worth more than the face value. Just sayin'.....Roger

There is way too much rust on what's left to get a good repair. New axle of new trailer? It's the question of the day.

Photos of axle and spindles

My memory sucks... the axle is a piece of upside down c-channel approx. 2"x3" with the spindles welded inside the channel. I don't have...

All the motors they sold back then that had the 'Maximizer' circuit built in were the way to go. I've been hoarding and rebuilding them...

If you do this with your house, TURN OFF YOUR MAIN BREAKER. If you don't turn the main off, you will back-feed the entire neighborhood...

I need a better pic to see what needs to be done. Have you thought about installing a regular trailer axle or is that way too much money?