thill's latest activity

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • thill
    thill reacted to Pappy's post in the thread Prop advise with Love Love.
    Most folks get hung up on the diameter and that is where a lot of confusion comes in. Pay more attention to the pitch number. This is...
  • thill
    thill reacted to LDUBS's post in the thread Prop advise with Like Like.
    I think all three of these brands have been recommended at one time or another in these forums. I am far from an expert, but feel all of...
  • thill
    Wow... The area you are in SUCKS for outboard sales! Around here, I could do a quick carb clean and sell every one of them, ESPECIALLY...
  • thill
    thill replied to the thread Hello from WI.
    If that boat has been on that trailer since 1956, that shows how much better-built the riveted boats were back in the 1950's. I've...
  • thill
    thill replied to the thread Trolling motor sideways install.
    I'm going to be the dissident here. I don't see any difference whatsoever in performance between front and center or to the far right...
  • thill
    thill reacted to LDUBS's post in the thread Trolling motor sideways install with Like Like.
    You should be fine. Go for it.
  • thill
    thill replied to the thread Graph mount.
    Airshot nailed it. I move the units from boat to boat, and this fix keeps it quick and easy.
  • thill
    I have a 50 AH, and two will be enough to run a 45# motor, BUT the price difference is only $45 each, so just get two of the 100 AH and...
  • thill
    It depends on how much use you put on the first battery before buying a second one. I had a couple of months on one before I bought...
  • thill
    When I got this boat, I didn't think it would handle rough water. I was absolutely wrong. This boat is amazing in big water. Very...
    • 20240718_110255.jpg
    • 20240718_110316.jpg
    • 20240718_105907 (1).jpg
  • thill
    thill replied to the thread CMC 35 install ?.
    I agree with LDUBS, you should take it off and fix ASAP. The longer it sits, the more issues it may have. Use a drill or dremel and...
  • thill
    thill reacted to LDUBS's post in the thread CMC 35 install ? with Like Like.
    If I'm understanding what is happening, you put a lot of stress on the outside aluminum transom skin around those bolt heads that pushed...
  • thill
    I just posted this on the trailer subforum, but this is a common enough problem that I thought I should repost it here for others to...
    • 1721322175833.png
    • 1721322234568.png
    • 1721322422716.png
  • thill
    thill replied to the thread Trailer Setup Help.
    What I recommend has proven to work successfully. Install one of these in the area right behind that front roller in the pic above...
    • 1721320638666.png
    • 1721320790580.png
    • 1721321195042.png
  • thill
    thill replied to the thread Graph mount.
    FWIW, I just swapped out both Johnny Ray mounts for the Ram mounts. I'm pretty happy with the switch, with the exception of running the...
Top