thill's latest activity

Couple 6x6 areas, here are the things that come to mind: -- I might just ignore it, meaning leave the spaces empty. -- Stick some...

That Crestliner is the exact boat I am looking for. I really like their construction, ride and comfort on the water. SO much easier to...

So the floor is out. Foam is in great shape, considering how bad the plywood is. I will do the vinyl flooring all around on all...

So the biggest PITA was removal of the carpet from the sides. The glue was still soft, paint thinner was super slow taking it off, same...

Hi Guys, here is new to me 1999 FishHawk. Floor is rotten (po started changing the floor but stoped, hence the new plywood in the bow)...

Yes, that should be fine, even if 30 HP. You could go 1/4" thickness, if you want to increase power without worry. 1/4" aluminum can...

Impellers are cheap. Motors are not. Definitely order a new warning horn/buzzer. One lead goes to the purple power wire, the other...

Your engine went in to S.L.O.W. (Speed limiting overheat warning). If you have an owners manual it is clearly outlined in it. Can be...

Some boats have a simple livewell, where you pull the bottom plug and water fills the livewell up to the water level, which usually...

Maybe I'm wrong, but it looks like there is an aluminum panel between the engine and transom skin. If he wants to proceed, he could...

It has to be installed somewhere on the boat with a power supply. Looks similar to a GPS puck. You aim the arrow forward, and it...

Wait, you mean I was supposed to keep that little white round thing? 😀

I wonder how long it would take with toothpaste and toothbrush? :D :D :D I use to clean spoons and spinner blades with it. ;)

Yes, the aluminum angle idea is exactly what I would do after replacing the wood, if it's a low-horsepower application.

If you have a Minn Kota with Spot Lock, add the Position puck, and it does a MUCH better job, especially if you put the nose of the boat...