thill's latest activity

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  • thill
    This build is sweet ive been fishing with mine bare bottom im getting tired of walking on the ribs and not having storage. Your design...
  • thill
    I ended up redoing the sub floor frame to run more parallel to the bevel. So the deck and the floor sort of split the difference between...
  • thill
    Use solid rivets, if you can get to the both sides. They are inexpensive and are very strong and durable.
  • thill
    They're more than likely fed by the same pump. Could be that someone has disconnected the fill hose to use it as dry storage.
  • thill
    thill replied to the thread Wrapping Rods.
    We have been using them for 2-3 years now, and they are holding up well. I wish I had bought more, because they are perfect for guests-...
    • 355804218_215453384742480_6148779381404393333_n.jpg
  • thill
    thill replied to the thread Wrapping Rods.
    You are right... there is a limit. A $500 dollar rod is probably not 5X better than a $100 rod. And as technology gets better, so does...
  • thill
    thill replied to the thread New impeller not pumping water?.
    Those square muffs are for Yamahas. Use the smaller, round muffs for an Evinrude 35. They can work, as you will see in my 2nd video...
  • thill
    thill replied to the thread Good alternative to plywood?.
    I've seen guys use something like these. At $25 each, they look like a VERY good deal, if stiff enough to use as decking...
  • thill
    thill replied to the thread Good alternative to plywood?.
    It doesn't really. We are having 40-50 MPH winds today, but it really doesn't move much at all. After the center one gets tightened...
  • thill
    thill replied to the thread Wrapping Rods.
    On the matter of wrapping rods, I personally prefer subtle designs. A single-thread wrap of silver, gold or other color below each...
  • thill
    thill replied to the thread Wrapping Rods.
    You portray yourself as rude and angry, with poor parental training. I am guessing that a number of us have caught many times more fish...
  • thill
    thill reacted to Billy H's post in the thread Wrapping Rods with Like Like.
    I wouldn’t call Ripdmup’s work crap. That’s an insult. That’s very nice work. I have found that the guys that take the time to add a...
  • thill
    thill replied to the thread Sand Gluvit before painting?.
    I was going to say use a thick or tripled Scotchbrite pad, but you already figured it out. Good job!
  • thill
    thill replied to the thread New impeller not pumping water?.
    Make sure the TOP of the copper water tube is in the right hole. If not, you won't get any water into the powerhead.
  • thill
    thill reacted to Fishingman48's post in the thread Ghost Town? with Haha Haha.
    Caught 6 turkey's and two doe's just before dark heading off to ??? through my apple orchard the deer here will stand 20 ft, away and...
Top