Tin Man's latest activity

I'm with airshot on this one. Since this is only a seasonal arrangement, I would not paint bottom. I would haul and clean bottom as...

Use a good coat of wax and pull once or twice a month and clean it off. If you insist on coating the bottom, read the instructions on...

Oh yeah, great for that also.

I don’t really need the guide posts for retrieving boat, it’s for backing up the empty trailer. I can’t see the trailer at all in rear...

After much analysis/paralysis, I went ahead an installed my transducer pad. Materials: HDPE (1" thick) cut to size. SS hardware #10...

What you have looks fine, as close to the livewell pickup as possible. Two screws should be fine for that one. I gave you my choices...

What are the thoughts on the size I have shown based on the cardboard template shown in pics? It is approx. 5" wide by 6"-9" tall by 1"...

I have done this on every fishing boat I've ever owned. I think it's a very good idea. I use either (2)1/4" bolts or four, depending...

If it were me.........I would add a bigfer, longer block just in case any future add-ons might be needed. One never knows what the...

Just expressing an opinion, if it were me....I would put as large a piece as I could make fit as a just in case....been there, done...

I wouldn’t trust glue on hpde at all. In industrial applications, it’s always heat welded. Through bolting should work well, but seal...

Merry Christmas! May you enjoy this holiday season with family, friends, and loved ones.

Merry Christmas! May you enjoy this holiday season with family, friends, and loved ones.

when you say, "bigger," what does bigger mean....taller, wider, ? It is 1" thick which is plenty for this application. I do not have...

I am preparing to install my new Lowrance HDS PRO 10 with 3 in 1 HD Active Imaging transducer. I have mounted HDPE blocks on the...