Recent content by Trinity

What advantage would that be over just using the Outdoor enamel paint. I am using it on the Spectrum boat in my signature block.

Anyone tryed olympic WaterGuard wood waterproofing? I used it on my first tin but didn't keep the boat long so I don't know the long term effects. https://www.pro.olympic.com/olympicpro/products/exterior-stains/clears/waterguard-wood-clear-waterproofing-sealants.aspx

Finally getting something done. What do you guy suggest I use to waterproof the wood with?

I got them off ebay. 200 for under $20.

Anyone know where to get 1" pop rivets? I am finding it hard to find anything larger than 1/2".

Whats the best way to get the old carpet glue off?

A few pics

Ok here we go!!! Came up on a 1991 Spectrum 1706 w/ a 75hp Mariner on a killer deal and I can’t wait to get started on it. Matter of fact It was at my house for about 30 minutes before I started ripping away at it. The motor needs some work, all the wood need to be replaced and carpet. The paint...

Ok, my motor is running a little weak and I am getting the oil dripping so I am going mix up a new 50:1 mixture and do it right this time. Poor wasted gas. :(

Ok, my motor is running a little weak and I am getting the oil dripping so I am going to mix up a new 50:1 mixture and do it right this time.

What happens when you mix too much oil in a 2 cycle outboard motor?

Ok, I am not sure what happen but she is running now! I took some time off and went on a cruise, hooked her up this morning and she is running. As soon as I primed it I could hear the gas going in the carb like it should and it started on the first pull. Got some good info and know-how so I...

Thanks man, got it!! :D

Thanks for your help cajuncook1. I was using fuel and oil from my gas tank straight to my carb to get it to fire, sorry I was not more specific. 1.) Is this motor new to you and has it run well since you have had it? Answer- This motor had ran well for me before this. I even took her to a shop...

My 1972 Johnson 9.5 is having issues. I can only get it to start if I pour gas straight into the carburetor and it will not stay on. I checked the lines and I know I am getting the gas to the carburetor but I noticed that no gas is coming out the small pipe inside the carburetor when I prime it...