Boat Restoration Project

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SilentBobber

New member
Joined
Aug 6, 2024
Messages
1
Reaction score
3
LOCATION
Greenville NC
Recently I've inherited a 12 foot Aluminum Jon Boat that belonged to my great grandmother, and great great grandmother(split owners at that time, and the best duo in NC). I'm thinking of posting the progress to keep track of what I do. I want to bring this back to life and then surprise my father with a trip on it's first launch.

It's a pre-1972 boat with no hin number, so it's been in the family awhile. I'm working on the beginning steps of restoring it to good condition, now that registration is finished. All in all it is solid, other than 2 small holes I have to weld in the hull (2 inch by 1/4 inch slits) and a small hole in the top of the transom I assume is from where a motor was once improperly mounted. I also have to replace a number of rivets along the port side, and replace 2 of the horizontal supports. Any tips/tricks, pictures of your build, or comments are appreciated
 

Attachments

  • 20240707_064134.jpg
    20240707_064134.jpg
    197.6 KB
  • 20240707_064304.jpg
    20240707_064304.jpg
    102.6 KB
Top