Search results

Theyre not finishe, I have to wait till Thursday before I can get the pvc and my new lights. These were really simple to make.strangth was not really an issue as I use my side boards for guides I just made these for when im backing IP and to quit dunking my lights. I just used some angle iron...

My hinges are a hair above the lids and I wish I wouldve lowered them.i havent stepped on one but ive put my knee on them two or three times and in 90 degree weather I thought it was gonna burn through my leg they get hot. If I was you I would try to put an extra piece of carpet over the hinge...

Alot of people do it,I have it my boat. My back compartment has the gas tank and battery. But my fuel lines are on the opposite site from the battery and vent tube runs up through the deck so there's less fumes in there. I personally am not worried but do what you feel safe with, nothin like...

Pleasr make sure things are bolted down! I know us tinboaters have tons of mods done to our boats.well ive been in the middle of carpeting my back deck for a while.well I only had onr piece left but ive been putting it off. Well I never bolted the front back down, and seeing as how it weighs...

I had a tiller extension on it for a while, but it made it a pain climbing on the deck anf starting it then moving forward to steer it. Plus with a 24" extension it makes sharp turns impossible. The way it sits now is perfect. Just gotta get some plywood and carpet to cover up all the ugliness.

Well my boat was a side console but I wanted an open floor so I made it a tiller. Only problem was my back deck is 48" which makes driving an adventure and a challenge. It had three livewells, two small ones which I use one for tools and the other for drinks. Well the big one was too small for...

What size motor are you running and is it 2 stroke or 4? I checked all my foam and it seems to be fine no water logging at all.im fixen to cut my deck to about half the size it is now so hopefull thats about 40lbs and then im gonna move my battery upfront as well

They both have there pros and cons. I got a good deal on my tinboat and trailer which is why I bought it. I wanted a fiberglass hull to layout how I wanted.I have a 1975 correct craft t-16 for free from my uncle he let it sit amd the transom split amd floor WAs waterlogged. I had my dads buddy...

Right now I have a 1995 Fisher 1650mv and I have a deep cycle group 27-29 cant remember exactly pretty close to the transom and my gas tank only about two gallons in it about a foot amd a half from the back of the boat.and me about 150lbs and im drafting about 6-7", thats also with a small two...

Ifcyou,have a friend or buddy make him a eal. Youbpark it and leave it at his house and yall can share it.the day beforevyoire gonna use it let him take your car and you take his vehicle....

Im just lookin for a few measurements. I have a 1650 and am converting it to center console.

Yep, mines a 1650 Fisher, my back deck is a little different it has two small bait livewells one left sife one right side and a big livewell between them for fish. Im probably gonna scoot my gas tank back and cut my back deck back 14" so I can sit closer to the motor. Just imagine having a...

Just measure mine, its the same length.

Ok, thank you very much. Good work! Boat looks super nice

Oh wow I guess I worded it wrong. I meant from inside of transom to the front of the REAR deck. Basically just measuring the back deck frrom transom to the where you sit at, thanks again

I know this is random but can you measure from the inside side of your transom to the front of your back deck? I just wanna see if mine is average size or not. Im thinking about cutting it back a few inches but not sure, thanks

Its a really nice boat and I got a great deal on it. Only thing that throws,it off is the inside but I plan on carpeting it. I just cant decide if I want to keep it a side console, male it a center console or cut se of the rear deck amd make it a tiller....

I have an 86 25HP two stroke and I get 26mph in ideal conditions. Mine is fully loaded with large front and rear deck. I plan on upgrading to atleast a 35-40HP when my funds will allow me

Well here in LA everybody has aluminum boats.I searched for a glass one but no luck. Im just tryin to figure out if I should cut this one up and make it what I want or sell it amd possibly be without a boat for a while