Search results

Regular old wall switch like gos in the house with a nice cover to match. 68 cents at Home Depot. Have used them for years, just put them flat side mounted so their not facing up in the rain. The 70 bucks I spent last year for the marine switch panel lasted about a year. Then you have to...

Tracker LW and was looking to see if anyone has cut the rear seat to leave a open area in the middle to walk thru and sit with out having to fold up one leg on the seat to run the motor. The seats in this boat are rivited to the floor all the way across and looks like it would keep the sides of...

Im with you on that one. The repair prices are even to high for me. Boat mechanic was the deciding factor to buy a new motor. When he gave me a quote for setting the timing and adjusting the carbs with a attitude because I replaced the parts I sold the whole rig and bought a new one. I looked...

As a side note on the trailer, most boats I have had have been overloaded seems dealers never put enough trailer under the boat. After blowing five tires on a trip to Florida oscar fishing I decided enough was enough and put together my own trailer that would haul two boats. Tires quit blowing...

Thats just the spare tire holder not double axel. The trailer I made into a flat bed to haul different flat bottom boats or anything else. The seats are made by Tempress. Mossy oak shadow grass camo. I found boats seats and a good camping bed is things not to skimp on. Being comfortable keeps me...

Have been rigging out this new set up and found it works really well for its intended purpose, fishing skinny water. The little Tohatsu makes more power than I thought and will actually plane the boat just me no gear. I fish the local creek and a lot of shallow water and the boat being light as...

I just bought a 2013 4HP Tohatsu and it will plane my 1542LW Tracker with just me no gear. This is a light weight boat which is why I bought it. It normally stays in very skinny water most of the time in the creeks and rivers in midstate SC and works well for its intended purpose. I think when I...

After removing and cleaning five times found a small grain of trash in one port with a magnifying glass. Fixed and running great.

I have been working on the motor replacing all the fuel lines gas tank primer bulb and removed the carb and cleaned with carb cleaner and compressed air five times to get it to run WOT. It will now start and idle great but when the throttle is applied it has a bad stumble before winding up to...

Does any one know if we can get by with out the prime start in the summer time if the outboard will crank and warm up on its on. My 03 Yama 25hp 4 stroke has broke the bottom plastic cup on the prime start solenoid and I bent the spring pulling it out. My plan is to grind it off flat with a...