Search results

3M5200 should bond the two together.

I thought Chicago sewer rats were big, you need a huge glue trap!

My bad.

If she was 2 inches taller, would she have been perfectly round?

3M 4200 or 3M 5200

Look up Garboard plug.

You can try a nut splitter.

Tiller steered boats will have a lower motor rating.

The way I see it in a hundred more years you won't be able to tell it had been cleaned.

That was disappointing, someone had cleaned the penny diminishing its value. If it hadn't been cleaned it was $2.50 in its present condition .25 cents.

Talk to your town board and see if they would make an area for meeting people and install a camera.

Meet at the police station. Many of them have areas for this and have security cameras pointed at that area.

Your either going to have break the bolt or take a wood chisel or osculating tool to split the wood block allowing the bow eye to move forward and cut through the bolt. Then you can see what the next step will be.

The tree wedges are an interesting idea.

If color was the only issue, I'd do a vinyl wrap on it.

Having 3 knee braces might give a range of years it could be. Have you identified the model?

After looking at the site it might be in "Fine" condition. So maybe $8.00.

I'd be happy if it's worth $5.00.

The jack plate does 2 things first it raises the motor second it moves the motor to the rear 4 inches. Thats setback. You can drill out a few more of the dimples on the jacker and raise the motor an inch or more. My motor is about 2 inches above the bottom of my hull.

With the setback of the mini jacker you can raise the motor an extra inch or more.