Search results

I JUST REDONE MY FRONT HANDLES AND EYE HOOK ,THE RIVITS ON THEM WAS LOOSE SO I DRILLED THEM OUT CLEANED THEM AND PAINTED THEM BLACK, AND REMOUNTED THEM WITH NEW BOLTS,WILL POST PICTURES LATER.

IT NEVER HAD A LEAK,JUST TOOK THE CENTER BENCH OUT TO HAVE MORE ROOM IM GOING TO PUT STICK STEERING IN IT IM GOING TO PUT 2X6 METAL STUDS IN THE FLOOR AND BUILD A LOWER DECK IN THE FRONT AND RAISE THE FRONT DECK THATS IN IT NOW. I HEARD THAT IF YOU WELD THE HOLES YOU HAVE TO GET THE ALUM. REAL...

IM FIXIN TO START BACK ON MY BOAT , AND NEED SOME HELP ON THE 22 HOLES FROM WHEN I TOOK OUT THE CENTER BENCH , IM THINKING OF USEING SOME SMALL BOLTS WITH WASHERS WITH RUBBER ON THEM AND LOCK WASHERS AND LOCK NUTS. THERE ARE ONLY 4 HOLES ON EACH SIDE THAT ARE BELOW WATER LEVEL, LET ME KNOW IF...

WELL IM AT A STAND STILL RIGHT NOW HOPING TO GET STARTED IN ABOUT A MONTH ,STARTING WITH THE HOLES FROM THE CENTER BENCH , I JUST PICK UP SOME 2 X 8 s METAL STUDS FOR THE FLOOR BRACES.GOOD IDEAL OR BAD WE WILL SEE.

THANKS BAITCASTER I HAVE ALOT OF WORK TO DO BEFOR SUMMER .

I STILL HAVENT CLEANED IT YET,I GOT 22 HOLES TO FILL AFTER I TOOK OUT THE CENTER BENCH I WANT TO PUT BACK FACTORY RIBITS SO IT WILL LOOK FACTORY ON THE OUTSIDE DOES ANYBODY THINK THAT LOCAL MARINA SHOPS WOULD HAVE THEM,I HAVE ABOUT 4 OF THEM HERE IN FLORENCE,AL ,ONE IS A BASS TRACKER, AFTER I DO...

THANKS NATESTEP I BOUGHT IT AT THE END OF THIS PAST SUMMER AND I PUT IT ON THE WATER ONE TIME BEFOR WINTER TO WINTERISE IT AND TO SEE HOW IT FELT OUT BY MYSELF,THATS WHY I TOOK OUT THE CENTER BENCH ,I HAD TO STEP OVER IT TO GET TO THE FRONT DECK AND WHEN I DID THE FRONT DECK WAS CLOSE AND THE...

i bought this 88 waco 14/48 flat bottom with a 25 hp johnson and fixin to start my build so i done started tearing it down but didnt take some befor pictures but it had a center bench in it so i took it out and somebody built a exended front deck for the front bass seat and for storage and i rip...

THANKS , I WILL TRY THAT.

i have a minn kota hand control 30# 30 in shaft with a transom mount on it, im needing to know how to take the head off to slide the transom mount off so i can put it on a bow mount.or the top of the trolling motor off the get the mount off.i need that mount to put on a 34# 30 in shaft motor...

number 444 oh yea

HEY BUDDY NICE CONTEST MY NUMBER WILL BE 44. THANKS