Search results

I installed the carpet and lid handles and had some ideas on the tackle storage. I mounted 2 pieces of aluminum angle and tore apart a metal fish stringer to create extra storage for plastics. I also made a mount for my measure board. Closeup shot of the tackle storage. A final pic of the...

I framed the rear deck with doors big enough to easily take the gas tanks out if I needed to. The original ones were too small for the 6 gallon plastic tanks. I also have the seat frame so it will be hinged on the front and allow storage underneath. I cleaned and sanded my motor and...

I wanted to have a recess tray for my trolling motor pedal but geesh, they wanted over $100 for one. I built this one using a 1x4, 1x12 and some aluminum angle I had. I have approx $9 in it. I ordered my livewell from Great Lakes Skipper and put styrofoam all around it for insulation, I...

As I said earlier I replaced all of the foam in the floor and laid down the new marine carpet. I moved on to the deck frame. I opted for 1/16th" steel that is coated with a special rust resistant primer and then sprayed it black on top of that. I laid out 2 rod boxes, a livewell and tackle...

With all of the leaks that I didn't want to deal with anymore. I drilled out and replace 135 pop rivets, I sealed them 3M 5200 as I replaced them and then sealed every rivet and seam on the inside with it also. This is after removing everything down to the floor. As you can see it is pretty...

Hi All! I am new to the site, but have been looking around. Lots of great information! I live in Broken Arrow, Oklahoma and fish for largemouth and the occasional smallmouth on the river systems, Fort Gibson, Tenkiller and Hudson lakes. I've had this boat for a little over 5 years and finally...