TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Electrical
12ft MirroCraft Electrical project help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="FishinJ23" data-source="post: 514441" data-attributes="member: 34508"><p>Hello! First time posting here! I inherited a 12ft MirroCraft with a 6hp Johnson. That I am finally starting to build out. Nothing major at all and I will post pics when it gets started. I am working on the electrical aspect of the boat first and trying to figure it out. So I am not putting much into the boat its only gonna be Nav lights, Garmin Striker 4cv, 800 Gph bilge pump(prob overkill), and a Newport vessels 86lb thrust. </p><p>For the wiring I have I/O cutoff switch and a 4 gang switch panel with 15Amp breakers. </p><p>Do I need a separate fuse block? and If no then do I need a separate Negative bus bar? </p><p></p><p>The way I have it envisioned right now is the 12v battery will run out to the I/O then 2 power wires to the switch panel and to the trolling motor,</p><p>all accessories run to the switch panel. </p><p>The return wires is where the confusion comes up cause the switch panel has only 1 return wires to go back to the battery. Is this where the bus bar comes into play?</p><p></p><p>Thanks in advance!</p></blockquote><p></p>
[QUOTE="FishinJ23, post: 514441, member: 34508"] Hello! First time posting here! I inherited a 12ft MirroCraft with a 6hp Johnson. That I am finally starting to build out. Nothing major at all and I will post pics when it gets started. I am working on the electrical aspect of the boat first and trying to figure it out. So I am not putting much into the boat its only gonna be Nav lights, Garmin Striker 4cv, 800 Gph bilge pump(prob overkill), and a Newport vessels 86lb thrust. For the wiring I have I/O cutoff switch and a 4 gang switch panel with 15Amp breakers. Do I need a separate fuse block? and If no then do I need a separate Negative bus bar? The way I have it envisioned right now is the 12v battery will run out to the I/O then 2 power wires to the switch panel and to the trolling motor, all accessories run to the switch panel. The return wires is where the confusion comes up cause the switch panel has only 1 return wires to go back to the battery. Is this where the bus bar comes into play? Thanks in advance! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Electrical
12ft MirroCraft Electrical project help
Top
