Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Piomarine" data-source="post: 473715" data-attributes="member: 16014"><p>First question, I have stripped the old paint off the hull (it came off with a pressure washer)  Now most of the original primer seems to have bonded relatively well but about 40% of it did come off.  Before I repaint the outside of the hull, will I need to strip the old primer or just scuff and repaint?  Also, on the transom the old primer is getting this odd spiderwebbing.  I've never seen that before, but I am assuming I will need to wire-wheel the primer off and start over back there.  Input welcome!</p></blockquote><p></p>