Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="ljw34" data-source="post: 352426" data-attributes="member: 14218"><p>in case you have interest, 1/8 inch structural aluminum diamond plate is available. It doesn't weigh much is water and weather proof, and only requires rivets for fasteners. I used an entire 5ft X 10ft sheet to build an interior for my 1974 mirrocraft, and reinforced it underneath with aluminum angle iron. It cuts easily with a carbide blade or special jigsaw blades. It is easy to work with, but that one sheet cost 800 bucks including shipping.If you needed less, maybe you could get some at a metal recycler? I weigh 220 and my floor doesn't even flex when I walk on it.</p></blockquote><p></p>