Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="KevinWI" data-source="post: 240219" data-attributes="member: 7422">Note for anyone asking: Rig Rite timer module #520 does not work for two pumps. you will need two timers to make it work.Found out the hard way today....wired it right but fried the timer using two pumps simutaneously on a single timer...even started to melt the switch. Timer apparently is not rated for the 4.3a that both pumps together pull.  Odd part is that these are the Contura switches (common marine type) and it didn't trip the breaker before melting the switch. odd. new switch and timer are on the way. Will just have to wire each switch to one timer/pump.(Note: Jay, I told you wiring was my least favorite! :evil:  :lol: )</blockquote>