1958 Sea King 14ft Aluminum v hull

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Boogman

Member
Joined
Jun 11, 2024
Messages
15
Reaction score
17
LOCATION
Lancaster, OH
I recently aquired a 1958 Sea King 14ft and wanted to post it as I know of all the appreciation and present across this forum for tiny boats. I have replaced the transom and the wood on all three bench seats. I have two cast aluminum cleats to replace and then it’s time to figure out something about the paint. Last year before I knew anything about the boat I spray-painted it with the green that is on it now and I am thinking I would like to have the aluminum finish look instead. But that would require an awful lot of sanding unless anyone has any tips or suggestions otherwise. If it’s going to be too much of a pain then I will just paint it a different color again any and all advice, tips suggestions etc. are welcomed. Thanks guys.
 

Attachments

  • IMG_4632.jpeg
    IMG_4632.jpeg
    105.9 KB
  • IMG_4409.jpeg
    IMG_4409.jpeg
    200.3 KB
  • IMG_4405.jpeg
    IMG_4405.jpeg
    113.3 KB
  • IMG_4408.jpeg
    IMG_4408.jpeg
    181.9 KB
  • IMG_4407.jpeg
    IMG_4407.jpeg
    186.3 KB
  • IMG_4406.jpeg
    IMG_4406.jpeg
    184.3 KB
Last edited:

Latest posts

Top