Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Pappy" data-source="post: 498507" data-attributes="member: 3278">After all these  years of doing this I am hard pressed to tell the difference as long as you really pay attention to your .020 and by that I mean watch your points arm as you slide the feeler gauge in. Any movement by the arm to allow the feeler ga. in indicates an improper method and improper measurement. Takes a little while to get the  feel for that but pretty easy to do.  By far the most accurate way is to set your points then really dial it in with the timing pointer and VOM.</blockquote>