Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="fflsuun" data-source="post: 365818" data-attributes="member: 14849"><p>Alright, this little fighter of a boat is about to become like new, or at least workable with class.. Stripping the hull and interior now and once it's down to aluminum or at least to the paint that's bonded very well. I was looking to use some paint from Sherwin Williams that's around 200$, but the primer, top coat, and bottom paint are all available at Lowes here in ATL, Boat grade, for around 50$. I think I'm also going to add some "Flexible Rubber Coating" to all seems and critical points. I'm going to begin a new thread for my project, but thought I'd post this here as well for you John. (John has a very similar boat if not the exact same on another thread)  I hope you don't mind. Looking forward to seeing your progress as well. Lots to do but I plan to have her in the water in a few weeks. Got a Newer Merc 3.3 that should push it along nicely. One thing I could use some help with is adding some old style flooring.. Any comments or suggestions are appreciated.. Take care. James</p></blockquote><p></p>