Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Bantou" data-source="post: 519780" data-attributes="member: 36587">Pulled the transom wood this morning… it was worse than I thought. The piece of the original transom next to the aluminum had totally rotted away and 2nd piece was about 1/3 gone. Instead of replacing the transom wood, the previous owner just slapped another piece of plywood on and left a void behind the wood.I used an angle grinder and punch to pull the rivets on one of the brackets. I’ll probably wind up pulling the other bracket before putting wood back in it.I cracked the transom further while removing the wood. It is definitely going to need a welder now.</blockquote>