Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Bantou" data-source="post: 523252" data-attributes="member: 36587">Finally got the transom built. One coat of fiberglass epoxy on the flats and two on the edges so far. I’m debating whether to put a second coat on the flats or just go ahead and paint it. I’m leaning towards just painting it at this point. The edges are well sealed, it sits about 2” off the bottom, and it’s going to be painted where it shouldn’t see much water. Had to notch the top out because it looks like it was designed for a 1” transom instead of a 1 1/2”. Probably going to have to move the side braces back a little when I re-install them.</blockquote>