TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Jon and V Boat Conversions & Modifications
1974 RHYNCRAFT MAKEOVER
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="BAY BEAGLE" data-source="post: 488482" data-attributes="member: 31457"><p>Today the Bimini Top was put together, and the six mounting spots were marked along the top rail. I'll weld 1" × 6" angle at 4 of these spots to mount the hold down brackets. The other two will mount on the transom angle plates at each corner.</p><p>Mated up the front casting deck, installed supports for a seat mount and framing underneath to join both pieces of plywood. </p><p></p><p>[ATTACH=full]111021[/ATTACH]</p><p></p><p>Tomorrow I'll seal the welded seams in the floor with AC Delco Medium Body Seam Sealing Compound. Weld the 6 brackets for the Bimini mounts and 4 stress spots along the transom. Then weld the transom angle brackets to a 1/4 × 16" aliumium bar, battery boxes, then we'll turn it over, and start prepping the underside.</p></blockquote><p></p>
[QUOTE="BAY BEAGLE, post: 488482, member: 31457"] Today the Bimini Top was put together, and the six mounting spots were marked along the top rail. I'll weld 1" × 6" angle at 4 of these spots to mount the hold down brackets. The other two will mount on the transom angle plates at each corner. Mated up the front casting deck, installed supports for a seat mount and framing underneath to join both pieces of plywood. [ATTACH type="full" alt="19859.jpeg"]111021._xfImport[/ATTACH] Tomorrow I'll seal the welded seams in the floor with AC Delco Medium Body Seam Sealing Compound. Weld the 6 brackets for the Bimini mounts and 4 stress spots along the transom. Then weld the transom angle brackets to a 1/4 × 16" aliumium bar, battery boxes, then we'll turn it over, and start prepping the underside. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Jon and V Boat Conversions & Modifications
1974 RHYNCRAFT MAKEOVER
Top
