Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Goofass" data-source="post: 242164" data-attributes="member: 7527">Thank you all for the compliments.  The white is actually a very light grey.  I wanted something that didn't reflect too much light, but was a little lighter than 'primer' grey.  All the hatches are hinged using 1-1/16" SS hinges.  The hatch pulls are made from 1" nylon webbing material found at local outdoor stores like REI.  I had them cut 6 pieces 6" long, and they are screwed to the bottom of the hatches.  I couldn't see spending 25 bucks a piece on plastic hatch pulls from the boat supply stores.That is a Minn Kota PDV2 - 40#.  The foot control is a little touchy, but you get used to it.  Don't know what year it is, but it runs great.  I would like to upgrade to a PDV2 with the i=pilot system.</blockquote>