Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="ShipwreckStew" data-source="post: 349256" data-attributes="member: 10877"><p>Took some extra pool noodles today and cut them to fit under the splash well, then screwed the bulkheads to keep them in place. I underestimated the amount of noodles I could fit under there, thinking two per side would be plenty. I was wrong. I fit all four behind one bulkhead and will have to get four more the next time I'm out. Pictures below will show the before and after based on what side was left incomplete. I'm going to use my extra tuff-coat to seal the gap between the bulkhead and floor, hopefully this will allow any water to flow directly into the bilge area.</p></blockquote><p></p>