Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="thill" data-source="post: 501959" data-attributes="member: 4972">At this point, I realize that I'm about 2/3 through this project.   So far, I've<ol> <li data-xf-list-type="ol">Emptied the boat of seats and accessories</li> <li data-xf-list-type="ol">Removed the old flooring and decking</li> <li data-xf-list-type="ol">Cut out the welded-in aluminum transom</li> <li data-xf-list-type="ol">Dug out the rotten transom wood</li> <li data-xf-list-type="ol">Replaced the floor decking</li> <li data-xf-list-type="ol">Cut out and replaced the front deck</li> <li data-xf-list-type="ol">Replaced the transom coring with new, sealed wood</li> <li data-xf-list-type="ol">Welded the transom and splashwell back onto the boat</li> <li data-xf-list-type="ol">Welded up a bunch of corrosion and screw holes</li> <li data-xf-list-type="ol">Fabricated a new corner cap, since one was missing</li> <li data-xf-list-type="ol">Sanded, cleaned and primed the transom and splashwell area</li> <li data-xf-list-type="ol">Sprayed the transom area with fresh paint.</li> </ol>Now I have one more big decision to make...  Do I put the jump seats back in the back corners of the boat or do I put in a small rear deck/casting platform?Any thoughts or suggestions?</blockquote>