Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="lckstckn2smknbrls" data-source="post: 512141" data-attributes="member: 36805">I made some deep throat clamps from a Harbor freight Pittsburg Handscrew wood clamp.With the wood jaws closed and laying on a table you attach a 1x2 board to each of the jaws the needed length. Then you open the jaws about 1.5" apart and keeping them Parallel Then you put a square piece of 1x2, 1x3, 1x4, 1x6 or whatever you have laying around on the inner surface of the 1x2 attached to the jaw. I hope my description helps you envision what it will look like. The actual making of the clamp will be up to you..</blockquote>