Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="airshot" data-source="post: 523811" data-attributes="member: 1183">Start out with a proper check of motor height....get a straight edge on the bottom if the hull and slide it back and adjust the motor tilt until the cav plate is parallel to the bottom.  Is the cav plate above, below or right at the hull bottom?It should be at the bottom or "slightly" over or under.  That is your starting point!  Get the prop fixed or replaced before more testing.   Once the prop issue is settled, you can now get a good read on your setup, so intelligent adjustments can be made.</blockquote>