Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Flat Bottom" data-source="post: 265800" data-attributes="member: 4594"><p>More progress, I have managed to get alot done in the last few days. painted what was left to be painted (at least the first coat) got red oak hardwood plywood cut and drilled for the transom and coated 4X with spar urethane (that stuff makes a beautiful looking durable finish) cut and coated a few wood cross members i'm using on the new part of the hull. as of now, transom is ready to accept the engine, and i need to start modifying the console and get it riveted in so i can plumb everything for the engine. I'm going to leave it floorless for the first few test runs just to make sure the hull is good and sound. Here are a few pictures.</p></blockquote><p></p>