Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="LarryMc" data-source="post: 427172" data-attributes="member: 13895">It sounds like your motor has been converted from a prop to a jet. The AGL-44 is a unit designed to convert a long (20") shaft prop lower 4 stroke 60 HP motor to a 60/40 jet. It comes with an aluminum impeller that is the same as the one on the 2 stroke kits that Outboard jets sell. The aluminum impeller is part # 106.23. You should take yours off and see what the number is. The stainless factory impeller is part # 855708T60.The pump on my motor, a factory jet manufactured in 2016, is an AGM. It came with a stainless 3 bladed impeller which has the trailing edge cut back to allow the 4 strokes to rev up a little higher than they will with the 2 stroke stainless impeller which has not been cut back.</blockquote>