Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="hardwatergrampa" data-source="post: 51367" data-attributes="member: 454"><p>i just learned how to do mine i up graded from the old pullys and cable to the one large cable if thats what you have lookk behind the dash where the wheel goes through you should see a drift pin going through the steering wheel shaft pull rhe pin out and take off the lock washer should be 2 large nuts where the cable goes into the steering nuckel and one where the cable comes outremove both nuts and let them slide down the cable turn the wheel and this will back the cable out  thats how mine worked any   hope this helps</p></blockquote><p></p>