TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
9.5 Evinrude Seal/Compression
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Weldorthemagnificent" data-source="post: 472927" data-attributes="member: 22139"><p>Try richening the mixture screw. Turn counterclockwise. I do 1/8 turn increments and wait 15-20 seconds between adjustments for the motor to react to the changes. When I first fired mine up, it started easy enough but had a bad sneeze and I had to keep the throttle on start to keep it running. It took a little over half a turn out on the mixture screw to smooth it out. I was then able to adjust the throttle stop screw in a bit and it idled decent with the throttle on shift. If this doesn't fix it, then you might have to get into the carb and clean some more or out a kit in it.</p><p>https://youtu.be/1ShV_pLDSM8</p><p></p><p>Sent from my CLT-L04 using Tapatalk</p></blockquote><p></p>
[QUOTE="Weldorthemagnificent, post: 472927, member: 22139"] Try richening the mixture screw. Turn counterclockwise. I do 1/8 turn increments and wait 15-20 seconds between adjustments for the motor to react to the changes. When I first fired mine up, it started easy enough but had a bad sneeze and I had to keep the throttle on start to keep it running. It took a little over half a turn out on the mixture screw to smooth it out. I was then able to adjust the throttle stop screw in a bit and it idled decent with the throttle on shift. If this doesn't fix it, then you might have to get into the carb and clean some more or out a kit in it. https://youtu.be/1ShV_pLDSM8 Sent from my CLT-L04 using Tapatalk [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Motors
9.5 Evinrude Seal/Compression
Top
