Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Douglasdzaster" data-source="post: 511796" data-attributes="member: 27803">Hey y’all, I took the new Traxxis55 on its 3rd outing this weekend.This time with the power prop they sent me. The motor did great with the power prop. Even took out a little vibration it had before. We stayed in open water out of the grass and mud.The lake had a lot of floating debris from run off after a lot of rain.I just took the prop off the check for fishing line etc. after every trip.It was clean. When I went to put the prop back on the prop shaft felt like it pushed in about 1/8” or so. I hadn’t put the nut on yet so I slid the prop back off and felt it pull back out. After I had the prop back off I was ably to move the prop shaft in and out freely.Correct me if I’m wrong but this means the entire armature is moving in the housing.Any body else have a Minn Kota that has or does this?I tighten the prop nut with a torque wrench to 30 inlbs. Spec says 25 to 35.</blockquote>