TinBoats.net
The original aluminum boat site!
Forums
New posts
Search forums
Blog
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Boats
Motors
Beating the dead horse-with a prop
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support TinBoats.net:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Jdero620" data-source="post: 488758" data-attributes="member: 31696"><p>SO. I shimmed it up 3/4, if that helps but doesn't solve ill get jack plates, but there is a slight concave (from the bottom) curve to the hull, its probably 3/8 at worst and is gradual over the full 8 or 10 feet that is the flat portion of the boat, it terminates at the rear over about 3 feet. See attached. Too, the weld at the transom v floor joint hangs below the flat portion by about 1/8 - 3/16. Appears as though there may be a hook, but would this really cause great issue? </p><p></p><p>https://postimg.cc/BXZXyYc9</p><p></p><p>https://postimg.cc/DSH0S2Vn</p></blockquote><p></p>
[QUOTE="Jdero620, post: 488758, member: 31696"] SO. I shimmed it up 3/4, if that helps but doesn't solve ill get jack plates, but there is a slight concave (from the bottom) curve to the hull, its probably 3/8 at worst and is gradual over the full 8 or 10 feet that is the flat portion of the boat, it terminates at the rear over about 3 feet. See attached. Too, the weld at the transom v floor joint hangs below the flat portion by about 1/8 - 3/16. Appears as though there may be a hook, but would this really cause great issue? https://postimg.cc/BXZXyYc9 https://postimg.cc/DSH0S2Vn [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Boats
Motors
Beating the dead horse-with a prop
Top