Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Johny25" data-source="post: 322046" data-attributes="member: 7791"><p>#17 in the diagram is your packing for your slow speed idle screw, yes you want to put it in. It holds the screw in tightly. put it in just like you had in one of your pics. The brass fitting in the lower end of the carb should be your high speed or mid range carb jet. You do not have to remove it but have to make sure it is clean and clear</p></blockquote><p></p>